vented boxes sound better?

Home / the12volt's Install Bay / Car Audio / vented boxes sound better? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

brach01

Member - Posts: 2

Joined: January 15, 2008

Location: Ohio, United States

Posted: January 15, 2008 at 9:08 PM / IP Logged

I have a Diamond D3 12" sub...My box is pretty good. My main question was if I vent it, will I notice better sound?

greenbroncoguy

Copper - Posts: 299

Joined: March 27, 2003

Location: Florida, United States

Posted: January 15, 2008 at 9:16 PM / IP Logged

This is about the most general question you could have asked. Read here for yourself and decide for your app...

Search for other posts by greenbroncoguy

n2audio

Copper - Posts: 95

Joined: March 02, 2005

Location: United States

Posted: January 15, 2008 at 9:27 PM / IP Logged

it's not nearly that simple. Some subs are designed for use only in a ported enclosure, others only sealed.

The ones in the middle can usually sound good ported or sealed as long as the enclosure is built in accordance with the sub.

I got the t/s specs from diamond's site, and honestly - those subs don't model well ported OR sealed (better sealed), but sometimes you have to trust a reputable manufacturer more than enclosure design software.

The only way to find out is to build one and see. According to the manual 2.0 cf with a 4" diameter port that's 8" long.

brach01

Member - Posts: 2

Joined: January 15, 2008

Location: Ohio, United States

Posted: January 15, 2008 at 9:39 PM / IP Logged

Alright. Thanks. Been a big help...

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: January 16, 2008 at 12:20 AM / IP Logged

normally ported sealed boxes will not yield good results...why??

well sealed boxes are 99% time too small to work well as a ported system.

sedate

Silver - Posts: 1,173

Joined: July 03, 2004

Location: Colorado, United States

Posted: January 16, 2008 at 9:53 AM / IP Logged

n2audio wrote:

but sometimes you have to trust a reputable manufacturer more than enclosure design software.

Uhh - dude - not to be mean but this is horrible advice.

"I'm finished!" - Daniel Plainview

greenbroncoguy

Copper - Posts: 299

Joined: March 27, 2003

Location: Florida, United States

Posted: January 16, 2008 at 10:36 AM / IP Logged

sedate wrote:

n2audio wrote:

but sometimes you have to trust a reputable manufacturer more than enclosure design software.

Uhh - dude - not to be mean but this is horrible advice.

This is not 100% true - take Kicker Solo Barics for example; they look to be MUCH better in a sealed box then a ported on in WinSD, but everyoner knows they should go ported. There are several others out there that I can't remember that model similarly. It all just depends on which variables are different that are/can not be entered into the software program...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vented boxes sound better?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.