type x mounting

Home / the12volt's Install Bay / Car Audio / type x mounting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

s_abercromby

Member - Posts: 12

Joined: August 27, 2007

Location: Canada

Posted: February 21, 2008 at 9:47 AM / IP Logged

my 10" type x came with three different mounting gaskets, one big one that came on the amp, with holes in it, one thinner one with holes in it and one thin one with no holes in it, i am not reverse mounting it, do i take off the thick one and mount the metal to the box, or do i leave it on and screw it down and then put the thin one with no holes in it over top of the screws. help please.

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: February 21, 2008 at 2:23 PM / IP Logged

the thin one with no holes in it is for looks...you just push it over the rubber gasket that is on the sub for a clean no screw look

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

type x mounting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.