'95 nissan pathfinder wiring

I'm trying to wire in my pioneer deck and i have way more wires than i need under the dash i need to know if the tweets in the vehicle are wired seperately or in with the 6x9 and how i tell where and how to wire in the stock amp. the wiring guide dosent match up to my vehicle that you have on the site help me please

why not get a wire harness and save the hassle for the next guy??  And you have a factory amp behind the panel above your pasengers weel whell.  You should bypass it.

There wont be speaker wires for tweets in the dash, its just FL, FR, RL, RR, and that goes to the amp then splits up.

Yeah, I always use a harness whenever possible.  Stock tweets are 99% of the time just wired in parallel with the mid drivers, only have a cap inline.  The colors for wires in a stock amp'd system always seem to be different than non-amp'd.  If you've already decided you're going to hardwire, use this link (even if the colors are wrong, you'll still have a pinout): http://www.installdr.com/Harnesses/Nissan-Wiring.pdf

well i see my problem now i have a 95 pathfinder with a 94 harness in the dash damn nissan cant make anything easy         

why should i bypass the stock amp? is there a problem with it?

by the way thanks for the help