the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Tahoe Onstar Bypass?


Post ReplyPost New Topic
< Prev Topic Next Topic >
cb229 
Member - Posts: 6
Member spacespace
Joined: May 15, 2004
Location: United States
Posted: May 15, 2004 at 12:58 PM / IP Logged  
I'm trying to install a new head unit in my 2001 tahoe.  After installation there is no sound. After reading a few threads here I see it is because of the Onstar system and it needs some kind of adapter. I never use onstar and it is not even subscribed to their service.  Is there a way to just completely bypass this?  Does anyone have a diagram for the other small harness that goes into the back of the stock unit? 
sexyvic1 
Copper - Posts: 144
Copper spacespace
Joined: April 29, 2004
Location: United States
Posted: May 16, 2004 at 12:37 AM / IP Logged  

whats up buddy? i am pretty sure that you will need to wire harness's from metra

one is the 70-1858

and the other is the 70-2006 ( i believe this is the one for the onstar )

good luck

sexyvic1 
Copper - Posts: 144
Copper spacespace
Joined: April 29, 2004
Location: United States
Posted: May 16, 2004 at 12:38 AM / IP Logged  

whats up buddy? i am pretty sure that you will need two wire harness's from metra

one is the 70-1858

and the other is the 70-2006 ( i believe this is the one for the onstar )

good luck

cb229 
Member - Posts: 6
Member spacespace
Joined: May 15, 2004
Location: United States
Posted: May 16, 2004 at 4:27 AM / IP Logged  

I do not want the Onstar hooked up,  I do not use it.  There is got to be a way to do this without buying a harness. I spliced into the pink wire on the small harness and hooked it to power like I read from a post here.  The sound came on and everything worked but there was a spark popping noise coming from the factory amp so I know that is not right.  It is close though.  All I need is a diagram for the seperate small harness!

jwLLL 
Member - Posts: 2
Member spacespace
Joined: May 23, 2004
Location: United States
Posted: May 23, 2004 at 1:13 AM / IP Logged  
You are going to have to bypass the factory amp with 4 speaker wires. That's it. No harness. Under glove box. Not to each speaker.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, November 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer