box design suggestions

Home / the12volt's Install Bay / Car Audio / box design suggestions (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: August 30, 2004 at 10:48 PM / IP Logged

hello, i'm planning on running 3 pioneer tsw-2000spl 12" subs in my 1995 dodge neon, the system i have planned is running one box 4.5cu/ft (1.5 cu/ft for each sub) i'm planning on having a peice of plexi across the opening ot the trunk that you see when the seats are down , then having 2 of the subs on 45' angles towards the center of the trunk and the third sub going straight across to form this shape " \_/ " with the top of the pic the back seats, my only prob is i plan on having the middle sub inverted so looking back you see the magnet of the sub, would this affect any of my over all sound or would it be such a small change it wouldn't be anything to worry about, i'm also doing it to hopefully save some space.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 31, 2004 at 12:43 AM / IP Logged

Well, what kind of box are you going to be building with 4.5 cu/ft? The idea for the \_/ would look good/better made with fiberglass, if you are up to it. Inverting subs don't make much of a difference in sound, but you have to remember to wire the inverted sub in phase (make the cone move in and out) with the others

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: August 31, 2004 at 7:13 AM / IP Logged

hello, i do plan on fiberglassing it, i just finished mobile dynamics and now i wanna put my new found skills to use (no market for high end custom work around here) the subs are going to be in a sealed box because i don't have any space left to put ports that would make them usefull (ie: towards the back seats)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box design suggestions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.