the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Head unit problem, no sound


Post ReplyPost New Topic
< Prev Topic Next Topic >
gabrielsynn 
Member - Posts: 10
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: January 08, 2005 at 8:58 AM / IP Logged  
I installed a Pioneer DEH-P4600MP in a 1995 Pontiac Grand Am GT. I followed the stereo wiring chart from the site, except there are no wires on the Pioneer harness for the illumination wire or the dimmer wire. I turned the car on, turned on the deck, and it plays, but there is no sound at all. Visually, the deck plays, so it shouldn't be a problem with the ground (using the ground from the factory harness), but I don't really know for sure. Any ideas?
gabrielsynn 
Member - Posts: 10
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: January 08, 2005 at 9:32 AM / IP Logged  
OK, ignore this post....stupid chassis grounds. Put a screw in the back of the deck, attached a wire, grounded it, it worked perfectly. Whoever had the problem with the Neon with no sound, thanks for the idea.
gabrielsynn 
Member - Posts: 10
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: January 08, 2005 at 10:14 AM / IP Logged  
OK, back again....did the final install, tightened everything down, turned it on...problem's back. I have no idea what's going on with this thing, I've tried everything....
Oh yeah. I cut the ground wire and tried running it directly to the chassis. Not only is there no sound, but also, even with the ground cut, the stereo still comes on. WTH?
jazzcustom131 
Copper - Posts: 175
Copper spacespace
Joined: October 10, 2004
Location: United States
Posted: January 08, 2005 at 2:32 PM / IP Logged  
The older guys probably have a better idea, but you may just have to run new wires for the speakers. It'll be a pain the a$$ but, if you really want your sound............
Greed is for amateurs.
Disorder,chaos,anarchy now THAT is fun!!
jazzcustom131 
Copper - Posts: 175
Copper spacespace
Joined: October 10, 2004
Location: United States
Posted: January 08, 2005 at 2:33 PM / IP Logged  

I say that meaning there may be something wrong with the harness

Greed is for amateurs.
Disorder,chaos,anarchy now THAT is fun!!
gabrielsynn 
Member - Posts: 10
Member spacespace
Joined: November 03, 2004
Location: United States
Posted: January 08, 2005 at 4:55 PM / IP Logged  
That's probably what it'll come down to. I'm still wondering why the stereo stays on without a ground...
rknj01 
Copper - Posts: 59
Copper spacespace
Joined: March 08, 2004
Location: United States
Posted: January 08, 2005 at 6:44 PM / IP Logged  
its grounding thru the antenna. take a meter and check to make sure each speaker is reading 4ohms
methinfinity 
Member - Posts: 36
Member spacespace
Joined: January 27, 2004
Location: Australia
Posted: January 08, 2005 at 8:23 PM / IP Logged  
run new wires son, most probably got a short to one of ya speakers.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer