the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

blowing fuses?


Post ReplyPost New Topic
< Prev Topic Next Topic >
wrathchild281 
Copper - Posts: 241
Copper spacespace
Joined: February 02, 2005
Location: United States
Posted: March 18, 2005 at 5:41 PM / IP Logged  
hey you guys i keep constantly blowing my fuses. At first i was using 60 amp fuses and now im using 80 amp fuses but they blow in like a day. A guy at a local shop said that would go away if i start using 100 amp fuses which i would need a bigger piece or whatever to fit them. Do you guys think this would fix the problem and what cuases this to happen? oh ya and have a jbl 600.1 at 1 ohm pushin 2 8's. Thanks
spl-Hz 
Copper - Posts: 94
Copper spacespace
Joined: June 18, 2004
Location: United States
Posted: March 18, 2005 at 6:25 PM / IP Logged  
What size power wire are you running?
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 18, 2005 at 7:11 PM / IP Logged  
What's drawing all the current?  Your amplifier can only draw about 60 amps as a BP600.1 is fused at 60 amps.
Support the12volt.com
AJRXtreme 
Silver - Posts: 302
Silver spacespace
Joined: June 08, 2004
Location: United States
Posted: March 18, 2005 at 8:39 PM / IP Logged  
i hooked up his system and the only thing drawing current is the jbl 600.1. he also has factory infinity speakers being powered by a factory amp. but thats all thats drawing current. pretty wierd
03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004
AJRXtreme 
Silver - Posts: 302
Silver spacespace
Joined: June 08, 2004
Location: United States
Posted: March 18, 2005 at 8:41 PM / IP Logged  
I have a feeling since those subs are wired at 1 ohm the subs are wanting more current than the amp can provide which means the battery is trying to supply the amp with too much current and the fuse blows. Thats what happend to my system a while back when i wired my 12's at 1 ohm.
03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 18, 2005 at 11:18 PM / IP Logged  

Two things.  First, the amp can only supply the current the fuses allow it to draw.  It will blow the fuses on the amp if the continuous current exceeds 60 amps (I believe that amp has two 30-amp fuses.)  Second, the amp fuses are standard slo-blo fuses, which means PEAKS can easily exceed the 60 amps since the amp can handle it, just not 60 amps sustained.

So, I bet you are blowing your main fuses (assuming there is no wiring fault like a short to ground or a bad capacitor or a high-resistance connection) because the fuses at your battery are FAST-blow type.   Fuses for wiring are generally fast-blow since they are designed to protect the wire (and your car) from faults like short to ground.  It is possible that the average current being used by the amp is less than 60 amps but the peaks are exceeding the 80-amp fast blow rating and this is blowing your fuse.

What gage wire are you using?  Choose the fuse size based on the wire's capacity, not the amp's.

Support the12volt.com
wrathchild281 
Copper - Posts: 241
Copper spacespace
Joined: February 02, 2005
Location: United States
Posted: March 18, 2005 at 11:57 PM / IP Logged  

i am using 4 gauge wire. so what do size fuse do you recommend i use?

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 19, 2005 at 9:29 AM / IP Logged  
4-gage can be safely fused up to 150 amps.  I'd use the largest fuse you can afford up to that rating.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer