How to seal Enclosures?

Home / the12volt's Install Bay / Car Audio / How to seal Enclosures? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

konrad100

Member - Posts: 47

Joined: October 03, 2005

Location: United States

Posted: October 13, 2005 at 1:55 PM / IP Logged

I have a box and noticed that the whole thing inside has sealent except the baffle inside, its just glued, is this normal or should i put sealent there as well. Also the round box terminals are not sealed as well, should i seal those or is it ok not to??

SoundAudio

Copper - Posts: 242

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 26, 2004

Location: United States

Posted: October 13, 2005 at 2:19 PM / IP Logged

Box terminals in genearl are likely to leak so I would go ahead and seal around it. The baffle is usually not sealed because they are lazy and figure you won't notice. It never hurts to get a hand squeeze tube of silicone and seal the baffle.

Good Luck!

-Thad

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How to seal Enclosures?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.