the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Checking Impedance?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jweb 
Member - Posts: 49
Member spacespace
Joined: September 19, 2004
Location: United States
Posted: May 19, 2006 at 10:55 AM / IP Logged  

Is there a way to test how many ohms a speaker circuit has?   Thanks

xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: May 19, 2006 at 10:58 AM / IP Logged  
a multi meter.
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: May 19, 2006 at 11:41 AM / IP Logged  
A multimeter will tell you the DCR (DC resistance) of a circuit but not the loudspeaker load impedance.  Measuring actual impedance requires things like sweep generators... what is it you really need to know?
Support the12volt.com
Jweb 
Member - Posts: 49
Member spacespace
Joined: September 19, 2004
Location: United States
Posted: May 19, 2006 at 3:07 PM / IP Logged  
I am upgrading the amp on my motorcycle (GoldWing) and it's 4 channel, bridgeable. A LA (Lightning Audio) tech told me I couldn't bridge it with the high level inputs (speaker outs) unless I had 4 inputs. The stereo is 2 channels with 4 speakers and until I find a way to tap into the preamp section to get a low level output, I have to run it with the speaker outputs. I wanted to measure the impedance of the 2 right and left channel speakers to see if I could parallel them to the 4 inputs of the amp so I could bridge it in order to get 200 WRMS per channel (4ohms) instead of 75 WRMS (4ohms).   What do you think?  Thanks,  Joe
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: May 19, 2006 at 4:25 PM / IP Logged  
I think the tech was correct in that you need an input to both the left and right sides of a stereo amp in order to bridge it, but there is no reason why you can't use the two channels from your HU to drive that amp.  You should be able to use the left speaker output from your HU to drive the speaker-level inputs for channels 1 and 3 and the right output to drive channels 2 and 4.  But the safer way to do this is simply to use a line output converter and Y-cables to connect the RCA signals (left to 1 and 3, right to 2 and 4, for example.)
Support the12volt.com
Jweb 
Member - Posts: 49
Member spacespace
Joined: September 19, 2004
Location: United States
Posted: May 19, 2006 at 5:38 PM / IP Logged  
I thought about that but figured the converter circuit in the amp would be much better quality than anything added on. What do you think? Thanks
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: May 19, 2006 at 6:21 PM / IP Logged  
Usually converter circuits in amps are crap and external LOCs are far better.  :)
Support the12volt.com
Jweb 
Member - Posts: 49
Member spacespace
Joined: September 19, 2004
Location: United States
Posted: May 20, 2006 at 9:33 PM / IP Logged  
Thanks for all the info. Bought a P50 and I'm done.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer