Fit a Stereo to a 1992 Fiat Uno

Home / the12volt's Install Bay / Car Audio / Fit a Stereo to a 1992 Fiat Uno (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

steveh282

Member - Posts: 1

Joined: August 01, 2006

Posted: August 01, 2006 at 2:12 PM / IP Logged

Hi I am trying to fit a stereo to a fiat uno 1992/93. The stereo in question is a JVC and i have the adaptor for it but the problem is that on the car I can only see 4 wires! RED. BROWN. BLACK and what looks like RED / YELLOW?? I take it red is switched power, black is ground but not sure on the other 2 wires

austincustoms

Copper - Posts: 232

Joined: November 15, 2005

Location: United States

Posted: August 01, 2006 at 3:43 PM / IP Logged

Test them with a volt meter, then tap what you don't have from the fuse box, and run new wires straight from the speakers.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fit a Stereo to a 1992 Fiat Uno

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.