the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dropped jl 10w6v2


Post ReplyPost New Topic
< Prev Topic Next Topic >
carson04 
Member - Posts: 4
Member spacespace
Joined: September 16, 2007
Location: Ontario, Canada
Posted: September 16, 2007 at 6:02 PM / IP Logged  
well, my brother managed to drop one my 10w6v2s when we were putting them into a different box, now the plastick part on the back of the magnet that has the JL logo fell off, apparentlly it is an air vent or smething, all that fell off is a plstick disc with a jl logo on it, so i put m sub back in the origanal box i was using and it sounds the same, but i cant help but wonder if im loosing sound sound quality, or if this missing part will actually make the sub over heat, any information to calm my nerves would be appreciated
reference10.0 
Member - Posts: 17
Member spacespace
Joined: September 04, 2007
Posted: September 16, 2007 at 6:59 PM / IP Logged  

Sorry to hear about your sub. so is there a big hole  now the size of the logo or does it taper back to a smaller hole like most subs have. I was looking on their site and if you look  on page 3 of this link and look at #5 Im guessing this is what your worried about. http://mobile.jlaudio.com/pdfs/7954.pdf

It says that it works with the cone venting but im not sure if that plastic piece is just for looks or if it makes air go back up the pole and out the cone vents.

hopefully someone else will answer that has had this happen before and can add more hands on input.

aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: September 16, 2007 at 7:04 PM / IP Logged  
dropping a magnet will make it lose some of its magnetic strength
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: September 16, 2007 at 7:08 PM / IP Logged  
I'm a JL dealer. Don't worry about it, your sub is fine.
There is no such thing as free installation!
carson04 
Member - Posts: 4
Member spacespace
Joined: September 16, 2007
Location: Ontario, Canada
Posted: September 16, 2007 at 7:27 PM / IP Logged  
thanks alot for every ones input, it was pretty easy to do so i didnt think there would be much damage

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer