Using An Aftermarket CDI Unit, Suzuki GSX750

Home / the12volt's Install Bay / Motorcycle Electronics / Using An Aftermarket CDI Unit, Suzuki GSX750

Welcome Guest :)

Members

< Prev Topic Next Topic >

danielhowden

Member - Posts: 1

Joined: May 31, 2024

Location: United Kingdom

Posted: May 31, 2024 at 1:47 PM / IP Logged

Hi, I have a Suzuki GSX750 that has a failed CDI unit. I was looking at using an aftermarket CDI unit but I haven't had any luck getting one to work thus far.

So, this is a 4 cylinder bike with two ignition coils. It has a sensor down at the crank for an ignition timing signal, I have measured this and it works giving out a small AC voltage of up to 1v.

I am happy to work with electronics and I wire up bikes as part of my work but I just feel I am missing something here and I wonder if someone could possibly point me in the correct direction.

As far as I can see the main stay of the basic CDI units have one pick up connection, I need a double pick up connection so that it can send it's 1v AC to the unit.

Any help here is very much appreciated.

Thanks, Daniel.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.