the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2009 honda odyssey wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
tillithz 
Member - Posts: 48
Member spacespace
Joined: July 06, 2005
Location: United States
Posted: December 14, 2008 at 8:34 PM / IP Logged  
Hey everyone, looking for 2009 Honda Odyssey vehicle wiring. namely the sliding door wiring, like, driver/pass common, open and close. I have a neat idea for a one touch/button arm (and close either sliding door that may be open) but need to pull everything together with specific wiring colors and how the doors work. Anyone know if the sliding doors work as they did in say 2006? I would assume so, but asking just the same.
thanks
tillithz 
Member - Posts: 48
Member spacespace
Joined: July 06, 2005
Location: United States
Posted: September 16, 2009 at 9:51 PM / IP Logged  
well, I have since been able to locate the sliding door wiring. However, I am running into a bit of a problem with interfacing a relay to close the door(s) when the alarm is armed.
I am using the armed output, and it is going to a tr7 programmed for feature #12. When the armed output of the alarm goes to negative, the tr7 puts out negative for 2 seconds on the white wire. The white wire then goes to terminal 85 of a relay and 86 goes to +12 constant. 30 goes to the common of the sliding door and 87 goes to the close wire. Basically when armed, the common connects with the close wire and triggers the door to close.
Except that isnt happening. The tr7 doesnt appear to have enough power to kick over the relay and connect the common and the close wires.
Does anyone have a suggestion on how to close the doors with the alarm arming? Please I am going crazy trying to figure this out and why it doesnt work the way mentioned above.
Thanks
racing_bidule 
Copper - Posts: 66
Copper spacespace
Joined: December 13, 2007
Location: Quebec, Canada
Posted: September 16, 2009 at 11:44 PM / IP Logged  

Honestly, I'm usually using a bypass module to simplify my life with these vans.

In the occurence an iDatalink module.

Sending an OEM alarm (-) arm output to our sliding doors inputs would make it happen.

I know it might not help you at the point you're in your install but maybe for future.

Regards!

If you fail on your first attempt, at least destroy all evidence you tried!
tillithz 
Member - Posts: 48
Member spacespace
Joined: July 06, 2005
Location: United States
Posted: September 16, 2009 at 11:53 PM / IP Logged  
yep, thank you for the info though.
I am certain this should be working. something is just not right. just cant figure out what it is. thank you again though

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer