backup siren 515esp pics inside

I have a Clifford Matrix 3.5 1) Hooked up red to constant 12V 2) Hooked up black to ground 3) Hooked up Orange TX wire to brain's BROWN wire (siren output) ---did the above, but my backup siren does not work???? Anyone have any ideas where I went wrong? I have this uni (view the pic)t: http://cgi./DEI-515ESP-BACK-UP-BATTERY-SIREN-Viper-Clifford-515R_W0QQitemZ350151023857QQihZ022QQcategoryZ60203QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

(dont know how to edit, but this is the link to my 515ESP)http://cgi./DEI-515ESP-BACK-UP-BATTERY-SIREN-Viper-Clifford-515R_W0QQitemZ350151023857QQihZ022QQcategoryZ60203QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Doesn't the siren come with a specific plug to be plugged directly into the unit? The brown you've used is a 12V+ on siren sounding,  the orange sits on ground and is data. The brain or siren is probably US by now.

howie ll wrote: Doesn't the siren come with a specific plug to be plugged directly into the unit? The brown you've used is a 12V+ on siren sounding,  the orange sits on ground and is data. The brain or siren is probably US by now.

\ what the heck? so should I remove the orange wire ASAP? my alarm looks like it is working now...how do I test the siren manually? ALso, which wire do I need to tap the orange TX into (from my brain?) ---The harness didnt fit my brain, so I had to cut the harness. Please help!

Thanks for the picture, the wiring assembly in the plastic bag should plug into a ready made port for it in the main module, except I've just looked at one via directechs and there doesn't seem to be a port for it!  I'm afraid that come Monday you will have to phone DEI tech support and get any info. Sorry.

typically, do I tap into the brown siren wire or the brain's BLUE wire? TX? (ive tried both, and the dam siren is not working)... anyone?