99 Sunfire

Home / the12volt's Install Bay / Car Security and Convenience / 99 Sunfire (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: March 24, 2003 at 9:32 PM / IP Logged

ok i have a prostart remote starter installed and then i got a buldog passlock bypass and the instuctions for the buldog say to hook a wire up to the negitive ignition wire on the remote starter Any one know where there is a neg ignition wire??

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: March 24, 2003 at 11:44 PM / IP Logged

the ign 3 wire on the r/s

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: March 25, 2003 at 7:53 AM / IP Logged

r/s??????

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: March 26, 2003 at 8:48 AM / IP Logged

The wire is more commonly referred to as a (-)ground out when running wire. What Model starter is that Prostart? your wire may be orange, but I would need to know what model. Just look in the manual for a wire that is a negative (-) ground output only while the Remote Starter (RS) is on. There should be some mention of this in the manual.

J Rilla

Owner/Installer

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: March 27, 2003 at 12:02 PM / IP Logged

I just installed a remote starter in my 99 sunfire but when I go to start it just starts and then stalls. But if I go and start it right after I have taken the key out from driving it around it it starts. Why will it not start like 5 min latter

Thank you for the help

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: March 27, 2003 at 12:06 PM / IP Logged

Sounds like you did not bypass the PASSLOCK system. If you so a search on your vehicle or passlock you should find the unit you need to buy.

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: May 10, 2003 at 3:30 PM / IP Logged

I have a 99 Sunfire and I cant get my r/s to work I I can't find a wire.

R/S

(White) + parking lights

(Red) Constant 12 v

(Brown) + Siren

(Black) Ground

(Orange) 30 amp Relay Starter Kill - output

(Grey) Spark plug wire

(Green) Door pin -

(Blue) Hood Pin +

(Violet) Door pin +

(Yellow) Brake Light +

Bypass

(Light Blue) Ignition 3 Neg input

Which wire would that be I can't seem to find the right one(I think this is the one that is wrong)

I know every think else but the bypass is hooked up right, if I start the car with the key and then turn it off and start it with the remote right after it starts. Any time after that it does not work

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 10, 2003 at 7:38 PM / IP Logged

(Light Blue) Ignition 3 Neg input- do you have this one going to a relay??? if not u need it to be a pos out put

does the remote start do anything at all???

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: May 10, 2003 at 11:39 PM / IP Logged

yes the car starts and then it stall and the theft light flashes

How does that whole relay thing work??

shredder

Member - Posts: 7

Joined: March 24, 2003

Location: United States

Posted: May 22, 2003 at 8:04 AM / IP Logged

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.