start activation

Home / the12volt's Install Bay / Car Security and Convenience / start activation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: August 30, 2009 at 7:42 PM / IP Logged

will neg start activation work on a 2006 jeep grand cherokee,the lock pulse is 330ohms,my R/S says 3 ground pulses to activate.I want to use the factory remotes for starting.

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 30, 2009 at 8:00 PM / IP Logged

You can use the actual motor wire and put a relay on it to convert the positive to a negative.

	Driver Mtr Unlock		LT.GREEN/ BLUE		(REV)		PLUG ABOVE FUSEBOX
	Driver Mtr Lock		LT.GREEN/ DK.GREEN		(REV)		PLUG ABOVE FUSEBOX

Convert a Positive Output to a Negative Output

If you have a switch or an alarm or keyless entry that has a positive output that you wish to use to switch a device that requires a ground such as a horn, dome light, parking lights, head lights, hatch release, etc., wire a relay as shown below to convert the positive output (trigger) to a negative output. start activation -- posted image.

Here's the same configuration showing a positive output from an alarm or remote keyless entry used to activate a vehicle's parking light relay that requires a ground to turn the lights on. start activation -- posted image.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: August 30, 2009 at 8:25 PM / IP Logged

Thanks a million !!!

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: August 31, 2009 at 11:59 AM / IP Logged

I am having no luck with programing this compustar CM4000,I need to change option 2-10 to 2 pulses for remote start and it isn't working,i tried with the antenna button,it says to hold button down till you get 2 p-light flashes,I never get 2,just 1 and then a slight pause then another flash,i never get 2 together.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

start activation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.