the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

compustar as 6000


Post ReplyPost New Topic
< Prev Topic Next Topic >
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: February 07, 2010 at 7:17 PM / IP Logged  
I recently installed a compustar AS6000  (alarm&start) with the 2way  900 remotes. The problem I am having is that when the alarm is disarmed, the L.E.D. light for the alarm flashes when a shock is detected from the shock sensor. So when the system is disarmed and the customer is driving his car the L.E.D flashes every time he hits a bump. Is there a way to turn this L.E.D. off while the system is disarmed?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 08, 2010 at 1:46 PM / IP Logged  
never had an issue of the led flashing while unarmed. What you wnat to check is programming and look for LED flashing with ignition off, with shock, etc.
If you are able to program it, change it to Flash only when no ignition.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
dswift 
Copper - Posts: 396
Copper spacespace
Joined: March 12, 2007
Location: United States
Posted: February 08, 2010 at 6:36 PM / IP Logged  

Update your brain. The last software kept the shock sensor on. Update it and you'll be good to go.

"dont ground out!"
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 08, 2010 at 7:18 PM / IP Logged  
you will only be able to update the brain if you have the BLADE module.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
simplyfalling 
Copper - Posts: 69
Copper spacespace
Joined: May 09, 2009
Location: Massachusetts, United States
Posted: February 08, 2010 at 8:49 PM / IP Logged  
you can also download the updates from www.firstechonline.com through the authorized tech page.  You will need the updater cable and the secure valet switch.  No need for a blade.  Best Luck!
dswift 
Copper - Posts: 396
Copper spacespace
Joined: March 12, 2007
Location: United States
Posted: February 09, 2010 at 5:06 PM / IP Logged  

You can update the brain with both ways.

Either you have an ADS-USB updater cable and a Blade or a ADS-USB updater cable and an LED Valet switch.
If you dont have the LED Valet Swich. You can twist pin 1 and pin 3 off the valet input together and this will act as a substitution for the Valet Switch.

If you have an OP500 you have a cable. It comes in the box. Use the CM4 connector. If you dont have that your gonna have to swap some pin locations off the connector to update the controller. Call Firstech for furthur help. 

"dont ground out!"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer