carvox cx 999 in a '98 corolla

Greetings. I recently started installing a carvox cx-999 system in my '98 corolla. the system features keyless entry and remote start.

i manage to get the keyless unlock-lock to work but it locks/unlocks when it wants to. if it does lock the car, the driver's door lock stays unlocked.

i haven't been able to get the romote start to work. i followed the wiring guide off of this site but no luck.

there are 2 wires comming from the cx-999 that i don't know what to do with. there's a blue/white wire that says *(-) 200mA Bypass Output When Remote Start*

There's an orange wire that says *(-) 500mA Ground-when-armed Output to Starter Killer*

there's a little pic telling me to cut the power to the distributor (please see illustration attatched to post)

the '98 corolla doesn't have a distributor... I have no clue what to do with this wire.

i connected the BLACK/ white wire to the pnp switch. I also connected the PURPLE / white wire to a tach wire (the blue / YELLOW to be exact) all the rest of the wires are connected properly according to the 1998 corolla alarm/remote start wiring diagram. feedback will be greatly appreciated.

I would also like to add an actuator in order to be able to use the trunk release feature that's availible with the carvox cx-999 ans possibly eliminat the trunk relase handle. What type of actuator will i need and how will I be able to install it properly? I am also interested in using the same concept for the gas flap. thanks for your time.