the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5901 2006 accord dlpk


Post ReplyPost New Topic
< Prev Topic Next Topic >
p-wi 
Member - Posts: 5
Member spacespace
Joined: February 17, 2010
Location: Texas, United States
Posted: February 17, 2010 at 8:19 AM / IP Logged  
so im just starting this install and wanted to make sure i understood all the connections. as i laid out all the wires and looked at the installation instructions i instantly became overwhelmed and now need serious mental help.
bit of background i understand diodes, have hooked up relays, one remote start/alarm install previous.
so: exactly what wires do i need from the ignition switch harness?
also im on a bit of a time restraint so to make it easy can a knowledgeable person look at my instructions and tell me hook this wire to that and this to that and now your done?
thanks in adavance!
dman007 
Copper - Posts: 106
Copper spacespace
Joined: November 24, 2002
Location: Florida, United States
Posted: February 17, 2010 at 9:58 AM / IP Logged  

From the ignition harness, you will need

12volt constant - WHITE

Ignition 1 - BLACK / YELLOW

Ignition 2 - BLACK/ RED

Accessory - BLACK/ RED

Starter - BLACK/ WHITE

Remember all of these wires will be heavier gauge, coming directly from key clyinder wiring harness.

DTS Performance
St Petersburg, FL
p-wi 
Member - Posts: 5
Member spacespace
Joined: February 17, 2010
Location: Texas, United States
Posted: February 17, 2010 at 10:25 AM / IP Logged  
what wires do those hook up to on the 5901 harness
x1le 
Copper - Posts: 171
Copper spacespace
Joined: August 01, 2009
Location: Massachusetts, United States
Posted: February 17, 2010 at 10:47 AM / IP Logged  
dman007 wrote:

From the ignition harness, you will need

12volt constant - WHITE _ connect to red, redwhite, and redblack

Ignition 1 - BLACK / YELLOW _ connect to pink

Ignition 2 - BLACK/ RED _ connect to pink/white

Accessory - BLACK/ RED _ connect to orange

Starter - BLACK/ WHITE _ cut wire in half and connect the car side to purple and the key side to green

Remember all of these wires will be heavier gauge, coming directly from key clyinder wiring harness.

don't forget to verify wire color accuracy with a meter prior to connecting.
dasbogie 
Silver - Posts: 514
Silver spacespace
Joined: September 30, 2006
Location: Pennsylvania, United States
Posted: February 17, 2010 at 10:54 AM / IP Logged  
Do you have  ac bypass for the transponder?  the dlpk does door locks, factory alarm disarm, trunk pop, triggers but not the chipped key
p-wi 
Member - Posts: 5
Member spacespace
Joined: February 17, 2010
Location: Texas, United States
Posted: February 17, 2010 at 11:14 AM / IP Logged  
i was told that the dlpk had a immobilizer bypass and it connected directly to the 5901 just needed 2 additional wires.
is the accessory supposed to be WHITE/ RED_ORANGE????
p-wi 
Member - Posts: 5
Member spacespace
Joined: February 17, 2010
Location: Texas, United States
Posted: February 18, 2010 at 5:42 PM / IP Logged  
does anyone know where the orange on the 5901 connects to? white and red?
dasbogie 
Silver - Posts: 514
Silver spacespace
Joined: September 30, 2006
Location: Pennsylvania, United States
Posted: February 18, 2010 at 8:37 PM / IP Logged  
did you test that wire with a meter in all key positions?
p-wi 
Member - Posts: 5
Member spacespace
Joined: February 17, 2010
Location: Texas, United States
Posted: February 18, 2010 at 8:41 PM / IP Logged  
what am i testing for volts i assume but what indication in each position, and what is the orange wire supposed to be connection to ?
x1le 
Copper - Posts: 171
Copper spacespace
Joined: August 01, 2009
Location: Massachusetts, United States
Posted: February 18, 2010 at 8:43 PM / IP Logged  
p-wi wrote:
what am i testing for volts i assume but what indication in each position, and what is the orange wire supposed to be connection to ?
viper 5901 2006 accord dlpk -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer