nissan pathfinder instal problem

Home / the12volt's Install Bay / Car Security and Convenience / nissan pathfinder instal problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bandit

Member - Posts: 2

Joined: April 15, 2003

Location: Austria

Posted: April 15, 2003 at 3:38 AM / IP Logged

Hi, i am having a Hunstmsan car alarm installed in a 2000 model ST Nissan Pathfinder. There is one problem and that is that when activating the alarm all doors except for the drivers door are locked, or unlocked when disarming. Is there a way of making the alarm lock all doors. Any help appreciated.

bandit

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 15, 2003 at 11:36 PM / IP Logged

when you use the key to lock/unlock the door on the drivers side, do all the locks operate??

if so you need to add a motor to the drivers door. and then tie the alarm into the the new motor. when the alarm operates the new motor it will in return lock and unlock all the doors

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 17, 2003 at 12:01 AM / IP Logged

Here are the correct wires for the Pathfinder, please double check these wires and post your results:

POWER LOCK|lt GREEN/ red |- |keyless entry module *1

POWER UNLOCK|brown |- |keyless entry module *1

*1 Keyless entry module is located under drivers side of dash.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

bandit

Member - Posts: 2

Joined: April 15, 2003

Location: Austria

Posted: April 17, 2003 at 12:59 AM / IP Logged

Thanks for the help guys. We found the problem. The Pathfinder doesn't use an actuator in the drivers side door, so we installed one and then ran wires from the rear door to it. All works well. Thanks for the help.

Bandit

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

nissan pathfinder instal problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.