the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 tundra reverse wire, xk05 programming


Post ReplyPost New Topic
< Prev Topic Next Topic >
dannyDEI 
Member - Posts: 4
Member spacespace
Joined: November 17, 2004
Location: United States
Posted: June 30, 2010 at 10:27 AM / IP Logged  
Ok 2 quick questions.
1. Where can I find the reverse wire on a 2010 toyota tundra double cab?
2. I bought the XK05 bypass and was told 2 keys are required however the instructions dont mention the second key. They basically say wire it, connect it, turn the key to ign and the red light on the bypass turns solid, start truck with key, the solid red light goes out and the bypass is programmed. Where do you use the second key?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: July 01, 2010 at 6:11 AM / IP Logged  

It's a blue wire in the passenger kick panel.

Don't know the XK, but i have never seen a bypass in a Toyota need two keys....

Mike M2
Tech Manager
CS Dealer Services
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: July 01, 2010 at 6:58 AM / IP Logged  

What firmware is loaded on the XK05? 

 I have used and prefer the 5.PKTI firmware ( over the PKT2 firmware ) on earlier Tundra's.  It is an easier install and works great.  Either way you should need only one working key.

Soldering is fun!
ajstetler 
Copper - Posts: 94
Copper spacespace
Joined: October 31, 2008
Location: Illinois, United States
Posted: July 03, 2010 at 11:23 PM / IP Logged  
I prefer the PKALL over the XK05...
Big Al
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: July 12, 2010 at 1:10 PM / IP Logged  
i don't know about you guys but i had a problem with a 09 tacoma when programing the module would not program i though i was doing something wrong i try a differente module same thing then i call tech support and they told that that some toyotas you have to try different keys if it does not work i did this and it work but only happened once
but to program you only need one key if the first does not work try a second key hope it helps
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: July 12, 2010 at 2:17 PM / IP Logged  
You cannot use the gray valet key....
Mike M2
Tech Manager
CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer