the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 focus python 1401


Post ReplyPost New Topic
< Prev Topic Next Topic >
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 16, 2011 at 11:19 PM / IP Logged  
I am very familiar with electronics in general. never have done a install for a remote start though. want to make sure i am on the correct note.... please help guys.
im going to mark ones that i think i do not need to hookup with a *NOT USED* and ones i am not sure about with *?????*
tell me if im right. Thankyou!
Main Harness (H1), 12-pin connector
H1/1 RED / WHITE (-) 200mA AUX/TRUNK RELEASE OUTPUT   
H1/2 RED (+)12VDC CONSTANT INPUT
H1/3 BROWN (-) 200mA HORN HONK OUTPUT
H1/4 WHITE/ BROWN PARKING LIGHT ISOLATION WIRE - PIN 87a of onboard relay
H1/5 BLACK (-) CHASSIS GROUND
H1/6 VIOLET (+) DOOR TRIGGER INPUT
H1/7 BLUE* FACTORY HORN INPUT (Use jumper to set polarity)     *?????*
H1/8 GREEN (-) DOOR TRIGGER INPUT (N/C** OR N/O)
H1/9 BLACK/ WHITE (-) 200mA DOME LIGHT SUPERVISION OUTPUT   *NOT USED*
H1/10 WHITE/ BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT    *?????*
H1/11 WHITE PARKING LIGHT OUTPUT
H1/12 ORANGE (-) 500mA GROUND WHEN LOCKED OUTPUT   *NOT USED*
H2 Harness, 18-pin connector
H2/1 LIGHT GREEN/ BLACK (-) 200mA OEM ALARM DISARM OUTPUT    *?????*
H2/2 ORANGE / BLACK (-) 200mA AUX 4 OUTPUT   *NOT USED*
H2/3 GREEN / WHITE (-) 200mA OEM ALARM ARM OUTPUT    *NOT USED*
H2/4 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT   *NOT USED*
H2/5 WHITE/ BLACK (-) 200mA AUX 3 OUTPUT    *NOT USED*
H2/6 WHITE/ VIOLET (-) 200mA AUX 1 OUTPUT    *NOT USED*
H2/7 GREY/BLACK (-) DIESEL WAIT TO START INPUT    *NOT USED*
H2/8 N/A    *NOT USED*
H2/9 VIOLET/WHITE TACHOMETER INPUT
H2/10 DARK BLUE (-) 200mA STATUS OUTPUT    *?????*
H2/11 PINK/WHITE (-) 200mA FLEX RELAY CONTROL OUTPUT    *NOT USED*
H2/12 ORANGE (-) 200mA ACCESSORY OUTPUT   *NOT USED*
H2/13 PURPLE (-) 200mA STARTER OUTPUT *NOT USED*
H2/14 PINK (-) 200mA IGNITION 1 OUTPUT   *NOT USED*
H2/15 GREY (-) HOOD PIN INPUT (N/C OR N/O)
H2/16 BLUE/WHITE (-) 200mA 2ND STATUS /REAR DEFOGGER OUTPUT   *NOT USED*
H2/17 BROWN (+) BRAKE SHUTDOWN INPUT
H2/18 BLACK/ WHITE (-) NEUTRAL SAFETY INPUT
Remote Start, (H3) 8-pin connector
H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT
H3/2 RED / WHITE +12V FUSED (30A) IGNITION 2/FLEX RELAY INPUT   *?????*
H3/3 ORANGE (+) ACCESSORY OUTPUT *NOT USED*
H3/4 VIOLET (+) STARTER OUTPUT
H3/5 RED +12V FUSED (30A) IGNITION 1 INPUT
H3/6 PINK/WHITE IGNITION 2/FLEX RELAY OUTPUT   *NOT USED*
H3/7 PINK/BLACK FLEX RELAY INPUT 87a (IF REQUIRED) OF FLEX RELAY   *?????*
H3/8 RED / BLACK +12V FUSED (30A) ACCESSORY/STARTER INPUT   *?????*
i just need a better idea of what NEEDS to be hooked up and what does not.
Also what else do i need? i have a relay and harness but do i need anything for factory security system?
im using this for the wires....
http://www.directwholesale.net/diagrams/printpage.asp?ModelID=14085&MakeID=18
if someone would like to copy and paste the part on each wire and tell me which ones NOT to hookup i would greatly appreciate it! :)
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 17, 2011 at 3:34 AM / IP Logged  
H/1 4 N/A
H/1 6 N/A
H1/ 7 Do you have a factory alarm?
H1/ 10 NA
H2/ 1 and 3, again is there a factory alarm?
H2/ 10 Will be used to trigger whatever by-pass you need.
H3/ 2, 6, and 7 N/A
H/3 8 Connect.
PM me with your email address, I'll send you the DEI list for this vehicle.
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 17, 2011 at 8:10 AM / IP Logged  
thankyou! i pm'ed you!
which bypass module do i need now?
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 17, 2011 at 4:59 PM / IP Logged  
what is a good bypass that is not super expensive..?
installing python 1401
if it is without another key id prefer that
thanks guys 2006 focus python 1401 -- posted image.
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: January 17, 2011 at 6:09 PM / IP Logged  
DEI 1100F can be had online really cheap and has been proven extremely reliable. You need two valid keys to program it but do not have to lose a key to use it.
Installer, IT support, and FFL. I need less hobbies.
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 17, 2011 at 8:56 PM / IP Logged  
any others you recommend?
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: January 18, 2011 at 7:39 AM / IP Logged  
The 1100F is probably the cheapest you will find. However there are a ton of options. My preference in bypass modules are those made by Idata. In actuality although the 1100F is labeled as DEI, I believe it was made by Idata and labeled as DEI.
Here is what Idata offers for your 06 Fusion: link
Installer, IT support, and FFL. I need less hobbies.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 18, 2011 at 8:03 AM / IP Logged  
Thanks Twelvoltz, I was a bit lost here, in the UK we've had 3 body changes and 3 wiring part colour changes since 98, thank goodness this year's new model will be the same on both sides of the pond.
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 18, 2011 at 6:37 PM / IP Logged  
Bought the ADS-TB at local dealer, 47 and some cents and they programmed it for me :) now i just need to get the girlfriend over to get it installed :) thanks i may have more questions
dblake 
Member - Posts: 10
Member spacespace
Joined: January 16, 2011
Posted: January 18, 2011 at 8:50 PM / IP Logged  
confused on the heavy geauge wires on which ones to hookup....
Remote Start, (H3) 8-pin connector
H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT Confused on where this one goes and other ignition (h5)
H3/2 RED / WHITE +12V FUSED (30A) IGNITION 2/FLEX RELAY INPUT   *NOT USED*
H3/3 ORANGE (+) ACCESSORY OUTPUT *NOT USED*
H3/4 VIOLET (+) STARTER OUTPUT   GOOD
H3/5 RED +12V FUSED (30A) IGNITION 1 INPUT    where does this go
H3/6 PINK/WHITE IGNITION 2/FLEX RELAY OUTPUT   *NOT USED*
H3/7 PINK/BLACK FLEX RELAY INPUT 87a (IF REQUIRED) OF FLEX RELAY   *NOT USED*
H3/8 RED / BLACK +12V FUSED (30A) ACCESSORY/STARTER INPUT   where does this go?
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer