95 k1500 power lock autopage c3rs665 2w

Anybody have a wiring diagram for the power door locks with Goodwrench add-on keyless entry. I've checked all wiring and coming up with nothing on this one. I've got 5 pin Blue, blue/red, Orange (polarity), black, and BLACK/ red. The keyless entry module box has no info on it just says goodwrench and was ziptied under the dash It's a 95 Chevy K1500. The remote start and alarm are working but no power locks from the remote. They work from the door switches but still nothing from the remote. I've tested the leads from the autopage brain and I am getting a pulse just stumped and finding no 5 pin diagram on it.

Which remote is not working? the one from the Goodwrench or the Autopage?  Check the fuses on the keyless entry module. Looks to have two fuses.

http://www./itm/390342841429?rd=1&item=390342841429&viewitem=&sspagename=WDVW&category=33578&ih=026&vxp=mtr

Link to a E-Bay page with some photos, might help.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Traced everything back to cut wires to a factory relay. Evidently, the  factory KE was swapped out at some point from a relayed system to a non-relay. This truck's wiring is a nightmare! I haven't found a wire yet that wasnt tapped, spliced, or in some other way molested. Tempted to buy a full harness and start from scratch...