viper 3303 starter kill circuit max amps

Home / the12volt's Install Bay / Car Security and Convenience / viper 3303 starter kill circuit max amps (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

123steve

Member - Posts: 1

Joined: March 22, 2013

Location: New Mexico, United States

Posted: March 31, 2013 at 6:58 AM / IP Logged

I would like to wire the "starter Kill Harness" ( 3 pin connector) to open and close a 20 amp fuse output. The 20 amp fuse supplys power to the starter motor relay and fuel pump relay (pin # 30, common) of each relay. Can the 3303 starter kill circuit handle 20 amps ? Starter Kill Harness description: pin 1 GREEN / WHITE-starter common (Key side), pin 2 green starter- normally open (motor side), pin 3 GREEN/ black starter- normally closed (motor side)

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 31, 2013 at 9:43 AM / IP Logged

Yes.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 3303 starter kill circuit max amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.