the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cm6000 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
qpham504 
Copper - Posts: 51
Copper spacespace
Joined: February 25, 2014
Posted: March 31, 2014 at 10:09 AM / IP Logged  
Hey guys,
So I got my ft6000as installed and confirmed that the remote start function worked with and without the blade. I finished the install by hiding all wiring within looms and cleared everything up. I was trying to program the double pulse and the one way remotes are clunky and the instructions were clunky. So fast forward I think I might have programmed something wrong and now when it remote starts it immediately shuts off. No warning lights or anything and it doesn't attempt to start again either. Any clues?
Also can someone assist me on what I need to do to program. When getting to the part where I press the trunk and key to scroll do I still have to wait 2.5 seconds to release? Still working this right now. I am glad I'm done with the install because it was a pain.
blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: March 31, 2014 at 3:24 PM / IP Logged  
What kind of car?
qpham504 
Copper - Posts: 51
Copper spacespace
Joined: February 25, 2014
Posted: March 31, 2014 at 3:27 PM / IP Logged  
Found the problem, it looks like there was static ground noise coming in from the glass breaking sensor. Judging by the route I used to run it the issue could be coming from the amp installation from previous owner or ground noise coming from the speaker wires running along the same route. For now I've unplugged the glass sensor until I can figure out how to handle this situation.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer