the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

volkswagen golf 2002, negative trigger


Post ReplyPost New Topic
< Prev Topic Next Topic >
Am3rikaz_m0st_W 
Member - Posts: 8
Member spacespace
Joined: August 15, 2003
Location: United Kingdom
Posted: October 31, 2003 at 3:44 PM / IP Logged  
could some1 please tell me where i can find the NEGATIVE TRIGGER INPUT wire in a mark 4 volkswagen golf 2002 model and what colour is it please......this is the last wire i require to finish my alarm install....many thanks in advance.
Javelin3o4 
Copper - Posts: 239
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: October 31, 2003 at 4:19 PM / IP Logged  

2001 Golf with power windows (may be the same for '02 model)

POWER LOCK.........(Yellow w/Blue  Negative Trigger --- Location - drivers door module *1      

POWER UNLOCK...(Green w/Red*2 Negative Triger --- Location - drivers door module *1
NOTE:  This vehicle has an immobilizer system that needs to be bypassed when adding remote start.  Use DEI part number 555U.  *1 The drivers door module is located in the drivers door.  *2 A double pulse will unlock all doors and disarm the factory alarm.  *3 The passengers door module is located in the passengers door.  *4 This wire will read the dome light delay.  The avoid the dome light delay, use the separate door trigger wires and diode isolate each one.  They are BROWN / white and are all located in their own door at their own door module.  *5 The comfort module is the main control module located under the drivers side of the dash.    *6 The windows can be rolled up and the sunroof closed by extending the door lock pulse.  DEI recommends that you only use a validity channel to roll up the windows.

Or

2001 Golf  w/o power windows (maybe same for '02 model)

POWER LOCK.......Yellow w/Blue....Negative Trigger....Location---comfort module *2

POWER UNLOCK...YELLOW /GREEN *1 Negative Trigger....Location---comfort module *2

NOTE:  This vehicle has an immobilizer system that needs to be bypassed when adding remote start.  Use DEI part number 555U.  *1 A double pulse will unlock all doors and disarm the factory alarm.  *2 The comfort module is the main control module located under the drivers side of the dash.   *3 There are 3 separate door trigger wires in this car.  Use all 3 and diode isolate each.  The drivers door is BROWN / yellow, the passenger door is BROWN / purple, and the rear doors are BROWN / white.

Javelin3o4 
Copper - Posts: 239
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: October 31, 2003 at 4:22 PM / IP Logged  
door trigger info is in the notes section.....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer