the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wires for the remote starter 97 range rvr


Post ReplyPost New Topic
< Prev Topic Next Topic >
samkelleytn 
Member - Posts: 2
Member spacespace
Joined: January 11, 2004
Location: United States
Posted: January 12, 2004 at 10:10 AM / IP Logged  

the wire dia form the remote starter web site shows the starter wire for the 1997 range rover 4.0 se as PURPLE / pink. and is located in ignition harness, there is no such PURPLE / pink wire anywhere under the dash or ignition switch. please help, locate the #1 starter wire.

thank you

sam kelley

sam kelley, memphis tn
mazdatruckin 
Copper - Posts: 69
Copper spacespace
Joined: September 10, 2003
Posted: January 12, 2004 at 10:41 AM / IP Logged  
Notes I got say [WHITE/ red] (-) Ign Switch
This car's a bitch because all ignition, acc, and start wires are (-) so they all need to be inverted.
samkelleytn 
Member - Posts: 2
Member spacespace
Joined: January 11, 2004
Location: United States
Posted: January 12, 2004 at 10:42 AM / IP Logged  

should i just pass on this then?

sam kelley, memphis tn
mazdatruckin 
Copper - Posts: 69
Copper spacespace
Joined: September 10, 2003
Posted: January 12, 2004 at 10:46 AM / IP Logged  
It's not an easy car... If I remember it's 5 wire for door locks, (-) parking lights, (-) ign, start, and acc wires. If you have lots of time and patience I would say go ahead. Beyond just those doors and ign switch, it's pretty easy because everything can be found at the BCM.
And if it has a factory alarm, then you would pulse the alarm wire and the lock wire at the same time. To unlock, pulse the disarm wire and unlock wire at the same time. IF it's for your personal veichle, then by all means go ahead. Let me tell you my first one is pretty frustrating because all the alarm's outputs are + so you need at least 3 relays for the ign switch. But there's no bypass of any kind so if you can overcome the ign switch, and the door locks, it's a piece of cake. But you may need up to 5 relays to do it all.
mazdatruckin 
Copper - Posts: 69
Copper spacespace
Joined: September 10, 2003
Posted: January 12, 2004 at 10:47 AM / IP Logged  
actually the arm/disarm wire is the same wire. Just pulse the unlock or lock wire to disarm or arm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer