Door Lock Help

Home / the12volt's Install Bay / Car Security and Convenience / Door Lock Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

92coupe

Member - Posts: 1

Joined: February 21, 2004

Location: Canada

Posted: February 21, 2004 at 5:26 AM / IP Logged

I have an 88 stang, and I just got my alarm installed......they didnt hook up the power door lock part, and I have power door locks.......can I just run a relay from the alarm's out put + and - through a wire that goes to the door lock button? Any help would be awesome......thanks....

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: February 21, 2004 at 4:52 PM / IP Logged

I believe your door lock circuit type is a 5 wire polarity reversal rest at ground. The lock wire is pink / YELLOW and the unlock wire is pinl/light green. They can be found in either kick panel. You will need two relays to wire the door locks up to your alarm.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door Lock Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.