the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

astra 777 in 1990 honda crxsi


Post ReplyPost New Topic
< Prev Topic Next Topic >
joecrx 
Member - Posts: 2
Member spacespace
Joined: March 01, 2004
Location: United States
Posted: March 01, 2004 at 9:42 PM / IP Logged  

im new to this so i got this new alarm system from asianwolf.com and i dont know where to start or how to  or wich wire goes where. \

need help please

crx
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 01, 2004 at 10:03 PM / IP Logged  
lets start w/ the basic for keyless and security
1.power input: 12v pos and neg
|              12V|WHITE/ black        |+ |ign harness, f/b plug       |
2.keyless: unlock and lock wire
need to add door lock motors
3.security: siren and door trigger(s)
|     DOOR TRIGGER|GREEN/ red           |- |either running brd *2       |
*2 Harness running down and forward from dash indicator has door and hatch triggers.
4.parking light flash: the unit may have 2 polarity to choose from, neg or pos. you can manipulate from neg a pos w/ a simple relay setup, or vice versa.
| PARKING LIGHTS +|RED / green           |   |switch harness, f/box       |
check those wire b4 plug and chug and youll be fine.
pretty simple.
if you have remote start w/ this unit, repost the result above then well start w/ RStart.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
joecrx 
Member - Posts: 2
Member spacespace
Joined: March 01, 2004
Location: United States
Posted: March 01, 2004 at 10:22 PM / IP Logged  

still confuse  i want to put  an astra 777 in my 1990 crx si 5 speed  two door no power locks

no i dont have remote start wiht this unit 

where do the wires from door trigger input go im so lost

crx
Toru 
Copper - Posts: 102
Copper spacespace
Joined: January 24, 2004
Posted: March 01, 2004 at 11:06 PM / IP Logged  
1988-91 Honda CRX Alarm Information
Study that chart. Connect each wire from the harness to the wire described in the chart.
For example, the door trigger. You need to connect the green wire on the harness (negative door trigger) to the green wire with a red stripe (GREEN/ red) found in the driver's running board (I think that means the plastic door sill cover - I don't own a CRX so I am not sure).

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer