Window modules

Home / the12volt's Install Bay / Car Security and Convenience / Window modules (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: September 27, 2004 at 6:18 AM / IP Logged

I am new at this window module thing. I have installed a prestge APS-996a into my girlfriends car without any problems. I have a DEI 530T window module to install. Now the 530T is self explainitory on the wiring connections and wiring it is not the problem. My problem is I cant seem to find the wires that I need. Everyone tells me at the switch in the door but this seems to be impossible. There is one harness with about 6 wires that connects to a black plastic switch box (LOCKS AND WINDOWS) and not to switches. The car is a 2Dr Stratus R/T 2002. Not to many people have been able to help me with this car. The model is a R/T not a sadan or coupe. If someone can please help me out with te proper wires for the windows and their locations this will be extremly helpfull. Thanks to all the people of 12 Volt.com.

MECP certified (If it really means anything)

Jeremy

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: September 27, 2004 at 1:10 PM / IP Logged

Can U give the colors at your door swich?

Don't Learn from Others Mistakes

You Might Be the One That Knows.

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: September 27, 2004 at 2:27 PM / IP Logged

I would have to rip off the door skin again. I know that someone gave me a tech sheet on this car and only ~3 wires were correct throughout the whole wiring detail. I know that there is 2 small ~26AWG wires and ~4 18 AWG wires. When all the wires were measured they all read open no matter what window you operate up or down. as the same for the power locks.

MECP certified (If it really means anything)

Jeremy

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: September 27, 2004 at 2:54 PM / IP Logged

Window Up	Dr\ LT BLU Pas\ BRN/WHT DrRear\ BLU/WHT PasRear\ GRY/BLK *
Window Down	Dr/ WHITE Pas/ VIO/WHT DrRear/ RED / BLK PasRear/ GRN/WHT	SEE NOTES
Ign Key Warn
Trunk Release	BLACK/ WHITE (+)	BCM CONN #4 Pin #1 **
OEM Horn	BLACK/ RED (-)	STEERING COLUMN HARNESS
Headlights	VIOLET/WHITE (+)	AT HEADLIGHT SWITCH
OEM Alarm Arm	LT GREEN/ ORANGE (+)	BCM CONN #4 PIN #4 BCM AT DRIVER
OEM Alarm Disarm	SINGLE WIRE SYSTEM	FUSE/RELAY BOX ***

* Main Switch For Driver Window Wires, Driver Kick For All Other Windows

Reversal Rest At Ground Type Window Circuit

** From Install BLACK/ WHITE (-) At Switch. *** ARM-Needs To See +12v Thru 1.8 K Ohm Resistor, DISARM- Needs To See +12v Thru 750 Ohm Resistor Reversal Rest At Ground Type Trunk Pop Circuit

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Window modules

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.