Dome light help

Home / the12volt's Install Bay / Car Security and Convenience / Dome light help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

saleen49

Copper - Posts: 99

Joined: August 31, 2004

Location: United States

Posted: October 01, 2004 at 4:37 PM / IP Logged

I need to wire in the dome light to a Mannix A/R on my 93 Mustang and followed the + door pin instructions that came with the alarm 86 to (-) dome light output, 85 & 87 to +12v, 87a to door pin switch & 30 to dome light, I did this but the light won't shut off,

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 01, 2004 at 8:18 PM / IP Logged

Did you wait for the Alarm to time out or turn the ignition switch on to cancel Dome light supervision:

Usually it is about 30 to 60 seconds

Don't Learn from Others Mistakes

You Might Be the One That Knows.

saleen49

Copper - Posts: 99

Joined: August 31, 2004

Location: United States

Posted: October 01, 2004 at 9:30 PM / IP Logged

Yes, i did both but dome light stays on,

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: October 01, 2004 at 10:05 PM / IP Logged

What happens when U disconnect Pin 86?

Don't Learn from Others Mistakes

You Might Be the One That Knows.

saleen49

Copper - Posts: 99

Joined: August 31, 2004

Location: United States

Posted: October 02, 2004 at 4:06 PM / IP Logged

what i found is i had 87a and 30 reversed diagram in manual showed it that way but the light stayed on, i reversed them and all is good,

thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dome light help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.