Installing Remote Starter on a Karr Syste

Home / the12volt's Install Bay / Car Security and Convenience / Installing Remote Starter on a Karr Syste (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jeff803

Member - Posts: 1

Joined: November 30, 2004

Location: United States

Posted: November 30, 2004 at 11:59 PM / IP Logged

I recently got a vehicle with a Karr system installed from the dealer. I believe it is the 2040 since I am using the Karr 3-button remote. Anyway what I want to do is install a remote starter system in this vehicle. Is there any recommended remote starter system to use with an existing alarm system and would it simply be activated using the 3rd channel output on the Karr remote? Only other question I have is will I have to disarm the alarm and then activate the remote start or is there some other way to do it that I am missing. Thanks a lot for any help you can provide.

Jeff

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: December 03, 2004 at 10:47 PM / IP Logged

You can use the (-)trunk release wire (blue) on the main wiring harness to trigger an external remote start module.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing Remote Starter on a Karr Syste

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.