03' Trailblazer Databus Problem

Home / the12volt's Install Bay / Car Security and Convenience / 03' Trailblazer Databus Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Yumm

Member - Posts: 1

Joined: March 05, 2005

Location: United States

Posted: March 05, 2005 at 7:22 PM / IP Logged

I've installed a CrimeStopper CS-2000 III and Databus DB-GMDLBP and everything works perfectly....untill.. I hit the brake. It seems like when I hit the brake it resets the databus unit and I have to hit the button on the databus unit to reset it again... then everything works perfect again...its only when I hit the brakes I have a problem.

Question is: Is there a fix to this problem?

Any and all replies are appreciated. Thanks.

Martiangimp01

Member - Posts: 4

Joined: March 05, 2005

Location: United States

Posted: March 05, 2005 at 7:36 PM / IP Logged

first thing that comes to mind is where did you catch your 12v for teh databus, did you take it off the column or did you run your 12v off directly off the battery... 2nd thing that comes to mind, is check your wiring... make sure nothing is backfeeding into the alarm, or the databus.. 3rd thing, check to see if the wire you caught @ the brake switch, is the correct one...

it may just be a bad alarm/databus...

Skip

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03' Trailblazer Databus Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.