the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start civic 95


Post ReplyPost New Topic
< Prev Topic Next Topic >
shawnterrell 
Member - Posts: 9
Member spacespace
Joined: September 25, 2004
Location: United States
Posted: April 19, 2005 at 2:12 PM / IP Logged  

HELP IS BADLY NEEDED....I GOT A CODE ALARM AND IM TRYING TO INSTALL THE REMOTE START IN MY CIVIC 95...I GOT EVERYTHING DONE AND ALL THE CAR DOES IS CRANKS BUT DOESNT TURN OVER WITH THE REMOTE...HELP IS WANTED!!!!!!

mxxmikexx 
Silver - Posts: 796
Silver spacespace
Joined: September 18, 2002
Location: United States
Posted: April 19, 2005 at 2:49 PM / IP Logged  
cranks but doesnt turn over? im assuming you mean it cranks but doesnt START with the remote starter? if thats the case your probably missing an ignition wire. you should have a BLACK / YELLOW as your ignition wire to be powered up while remote starting and a yellow wire for your accessory wire to be powered up.
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
shawnterrell 
Member - Posts: 9
Member spacespace
Joined: September 25, 2004
Location: United States
Posted: April 19, 2005 at 4:46 PM / IP Logged  
ok the ign 1 is pink and i hooked that hook to the BLACK/ yelllow and nothing happens and when i disconnect the pink and BLACK / YELLOW in turns over but dont start....any guesses of whats going on??? help is appriciated
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 19, 2005 at 7:19 PM / IP Logged  

<<<<< ok the ign 1 is pink and i hooked that hook to the BLACK/ yelllow and nothing happens and when i disconnect the pink and BLACK / YELLOW in turns over but dont start  >>>>>

HMMMMM..............

Please make a copy of your Vehicles Ignition Circuit , go over each wire and mark which wire from your RS goes to what...............
Do Not attempt to Remote Start your vehicle until ALL connections are made and you are sure of all connections.  Then follow programing Instructions of your RS

Constant 12 voltsWHITEIGNITION SWITCH HARNESS
Ignition 12 voltsBLACK / YELLOWIGNITION SWITCH HARNESS
StarterBLACK/ WHITEIGNITION SWITCH HARNESS
Dome LightLIGHT GREEN/ RED (-)ABOVE DRV KICK 2-PIN GRAY CONNECTOR
Trunk Pin SwitchGREEN (-)RT REAR TRUNK 2-PIN GRAY CONNECTOR
Parking LampRED / GREEN (+)DRIVER KICK PANEL BEHIND FUSE BOX
Power LockGREEN / WHITEGRAY 2 PIN CONNECTOR
Power UnlockGREEN/ REDBELOW FUSE BLOCK
Negative Pulse Door Locks

Accessories
Window UpD\ RED / BLU P\ BLU/GRN D\ YEL/GRN P\ GREEN @ MAIN SWITCH
Window DownF/ RED / YEL F/ BLU/YEL R/ YELLOW R/ GRN/YEL
Ign Key WarnBLUE/WHITE (-)BROWN 7 PIN CONN. ABOVE FUSE BOX
Trunk ReleaseN/A
OEM HornBLUE/GREEN (-)AT HORN RELAY *
HeadlightsRED / WHITE (+)DRIVER KICK PANEL BEHIND FUSE BOX
OEM Alarm ArmN/A
OEM Alarm DisarmBLUE (-) & GREEN/ BLACK(+) AT SECURITY MODULE

 Reversal Rest At Ground Power Window Circuit 

* Horn Relay Located In Instrument Panel Fuse/Relay Block

Remote Start
Tach SignalBLUEAT TACH TEST CONNECTOR *
Ignition #2YELLOWIGNITION SWITCH HARNESS
Ignition #3N/A
AccessoryWHITE/ BLACKIGNITION SWITCH HARNESS
Neutral SafetyGREEN / WHITE (-)GRAY 14 PIN CONN AT GEAR POS. SWITCH
Brake LightWHITE/ GREEN (+)AT BRAKE PEDAL BRACKET
Reverse LightGREEN/ BLACK (+)GRAY 14 PIN CONN AT GEAR POS. SWITCH
Rear Window DefrostN/ATIMER BUILT INTO SWITCH

* Tach Test Connector Located On Driver Rear Corner Of Engine Compartment.

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
shawnterrell 
Member - Posts: 9
Member spacespace
Joined: September 25, 2004
Location: United States
Posted: April 19, 2005 at 7:38 PM / IP Logged  

Please Help ........

PINK/white---ignition 2 output

orange----accessory i output

ORANGE / white--accessory 2 output

BROWN / red--brake input

blue/black--(-)active output

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 19, 2005 at 8:56 PM / IP Logged  

PINK/white---ignition 2 output    ........   =

Ignition #2YELLOWIGNITION SWITCH HARNESS

orange----accessory i output    ........    =

AccessoryWHITE/ BLACKIGNITION SWITCH HARNESS

ORANGE / white--accessory 2 output   XXXXXXXX

BROWN / red--brake input     .........   =

Brake LightWHITE/ GREEN (+)AT BRAKE PEDAL BRACKET

blue/black--(-)active output    XXXXXXXX

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
shawnterrell 
Member - Posts: 9
Member spacespace
Joined: September 25, 2004
Location: United States
Posted: April 20, 2005 at 2:48 PM / IP Logged  
thanks alot but i had all the wires right i was just making sure....but anyways i just dont know whats goin on with this thing...do you think its the code alarm? i heard they r pain in the butts but dang man i just dont know what is going on....when i have all the wires hooked up i press start on  the remote and it quickly shuts right off and when i disconnect the igntion 1 (pink and BLACK / YELLOW) it trys to start, all the accessories come on,cranks but wont turn over ...WHAT IS GOING ON?
thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: April 20, 2005 at 3:49 PM / IP Logged  
Have you got a good tach signal and program????
Be careful whose advice you buy, but be patient with those who supply it.remote start civic 95 -- posted image.
paulseclipse 
Member - Posts: 4
Member spacespace
Joined: April 20, 2005
Location: United States
Posted: April 20, 2005 at 9:47 PM / IP Logged  
well it sounds like your key has a chip in it and if you did not bypass it with a resistor or any other means the car will not start not exactly sure if that is yoru problem but its just something to check out i know i had to bypass the chip on my car for the remote start.
OhioMike1101 
Silver - Posts: 343
Silver spacespace
Joined: August 22, 2004
Location: United States
Posted: April 20, 2005 at 10:13 PM / IP Logged  
r u using voltage or tach?
Sounds like alarm may be prorgrammed for tach and you are trying voltage sense.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer