command start cs2400

Home / the12volt's Install Bay / Car Security and Convenience / command start cs2400 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

torpedos

Member - Posts: 2

Joined: August 23, 2005

Location: Canada

Posted: August 24, 2005 at 2:09 PM / IP Logged

Hi, new member here and would`nt u know it but I have a question. I need the programming instructions for a command start cs2400. I recently had the ignition changed on my pontiac and now the car`s theft deterrent system won`t let me start the car. Any help would be appreciated.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: August 24, 2005 at 4:25 PM / IP Logged

check this post:

https://www.the12volt.com/installbay/forum_posts.asp?tid=22120&get=last

Don't Learn from Others Mistakes

You Might Be the One That Knows.

torpedos

Member - Posts: 2

Joined: August 23, 2005

Location: Canada

Posted: August 25, 2005 at 12:37 AM / IP Logged

Thanks for the effort but that does solve my problem. My cars built in anti-theft won`t let the car start by remote because i had the ignition changed so now i need the programming instructions so my pontiac sunfire won`t think its being stolen when i start it by the cs2400 remote...Thanks anyway.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start cs2400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.