the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 Cavalier remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
not_startin 
Member - Posts: 31
Member spacespace
Joined: October 16, 2005
Location: Canada
Posted: October 16, 2005 at 8:26 AM / IP Logged  
I hooked up a new remote starter in my '02 Cavalier 5spd.Everything seams OK (locks,trunk,flashing)but I CAN'T get a tach signal.Or atleast I can't get it to learn the tach.What am I doing wrong?I have never had a problem like this before...I also tried a different starter (2 different startes-same car-same problem).Is there somewhere else to be hooking this tach wire up to other than the "purple w/white stripe"?
If it ain't broke...Maybe it should be!
iskidoo 
Silver - Posts: 1,043
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: October 16, 2005 at 8:28 AM / IP Logged  
What kind of unit?
Steve G
not_startin 
Member - Posts: 31
Member spacespace
Joined: October 16, 2005
Location: Canada
Posted: October 16, 2005 at 8:28 AM / IP Logged  
I need the wiring for the 02 Cavalier but WITH the wiring for the clutch bypass.
If it ain't broke...Maybe it should be!
not_startin 
Member - Posts: 31
Member spacespace
Joined: October 16, 2005
Location: Canada
Posted: October 16, 2005 at 8:31 AM / IP Logged  
It is an extreme.I believe they are made my Pro-Start...
If it ain't broke...Maybe it should be!
iskidoo 
Silver - Posts: 1,043
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: October 16, 2005 at 8:44 AM / IP Logged  
model #
Steve G
not_startin 
Member - Posts: 31
Member spacespace
Joined: October 16, 2005
Location: Canada
Posted: October 16, 2005 at 9:21 AM / IP Logged  

Xtreme EX-1784 SH

If it ain't broke...Maybe it should be!
iskidoo 
Silver - Posts: 1,043
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: October 16, 2005 at 9:37 AM / IP Logged  
Have you tested the wire to see what the AC voltage is at idle? Have you tried Multi Speed Tach? Are the parking lights flashing 5 times for a failed start attempt?
Is it trying to start at all?
Steve G
not_startin 
Member - Posts: 31
Member spacespace
Joined: October 16, 2005
Location: Canada
Posted: October 16, 2005 at 9:43 AM / IP Logged  
I tried both tach learn meathods.The voltage at the wire i believe was ~6v a/c(I don't remember the exact #)I have not even tried to start it yet...but if I can't llearn the tach it is not much good to me.I'm sure it will start fine w/o it when its warm but winter gets as cold as -46 here so it will need the tach so it doesn't under-crank.
If it ain't broke...Maybe it should be!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 16, 2005 at 9:56 AM / IP Logged  
Please give us the locations of the tach wires that you have used. If all else fails you can use the injector wire at the injector harnesses, use the uncommon colored wire.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: October 16, 2005 at 9:59 AM / IP Logged  
If you are using the WHITE wire @ the PCM ....it is a 2 Cylinder Signal........
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer