Designtech Autocommand

Home / the12volt's Install Bay / Car Security and Convenience / Designtech Autocommand (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigt_45

Copper - Posts: 48

Joined: July 07, 2003

Location: United States

Posted: December 19, 2005 at 12:37 PM / IP Logged

I have a Designtech Autocommand Remote starter installed in a 96 suburban. I am trying to program the unit for the one button transmitter, but it wont go into programming mode. I can wiggle the RCA cable for the antenna and get lucky enough to enter programming mode, but it wont stay long enough for anything. Do I need to buy a new antenna? Where would I get one?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 19, 2005 at 2:00 PM / IP Logged

Place a slight bend on the center pin and push in the outer prongs to make a tight fit around the male end of the connector.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: December 19, 2005 at 5:52 PM / IP Logged

lol neat trick jeff

Why oh Why didn't i take the blue pill

Darren Power

bigt_45

Copper - Posts: 48

Joined: July 07, 2003

Location: United States

Posted: December 20, 2005 at 10:07 AM / IP Logged

Ok, I did that and I think im gettin a good connection, but it still kicks out of programming mode and then wont re-enter. Is there any kind of wiring problem or short that could be causing this?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Designtech Autocommand

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.