92 Civic Ignited Push Start Button

Home / the12volt's Install Bay / Car Security and Convenience / 92 Civic Ignited Push Start Button (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nc_psx

Member - Posts: 2

Joined: January 03, 2003

Posted: January 03, 2003 at 7:57 AM / IP Logged

Just bought an Ignited push start button. Comes with a switch and a relay. I tried following the diagram and got no where. I also dont know which wire is for the igntion. The switch has four posts and the realy comes with five prongs. Post #1 and #2 are for the illumination for the switch, #3 is to the relay, and #4 is to the e-brake light or power (i hooked it up to 12 volt). On the relay, 87 is to ignition wire, 30 is 12 volt source, 85 is ground, and 86 is connected to post #3 of the switch. I used 18 gauge wires and used all wire tappers to connect everything. Right now im stuck and dont know what to do. Anyone out there can tell me step by step how to install this button (w/out using the directions from ignited). Thanks

nc_psx

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 03, 2003 at 11:12 PM / IP Logged

So where does the starter wire in all of this ??

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: January 04, 2003 at 1:52 AM / IP Logged

The most important thing is left out, the starter wire as Jeff mentioned.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

nc_psx

Member - Posts: 2

Joined: January 03, 2003

Posted: January 12, 2003 at 8:01 PM / IP Logged

so how am i suppose to hook it up? which wire goes to the starter and which wire goes to the ignition? What are the color code of my wires? thanx

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: January 12, 2003 at 10:34 PM / IP Logged

Here you go man,

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1992&make=Honda&model=Civic&ID=17968&type=Alarm

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

92 Civic Ignited Push Start Button

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.