the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Impulse RES-R


Post ReplyPost New Topic
< Prev Topic Next Topic >
John Doe 
Member - Posts: 11
Member spacespace
Joined: November 21, 2002
Location: United States
Posted: January 10, 2003 at 6:29 PM / IP Logged  
I bought an Impulse RES-R from ImplulseUSA.com and the picture shows a completely different starter then I received.  In the picture there was a 4 button remote, and a different brain.  Anyway I can handle it since it must be the same model that a lot of places sell.  The thing I cannot figure out is how to remote start the unit.  The manual is for a 4 button remote but mine only came with 2 buttons.  the first button is for lock, the second is for unlock and both are for the trunk.  I mean what other options are there. I tried pressingthe lock button three times and then holding it down etc.  ANy Ideas?
jd
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 12, 2003 at 12:32 AM / IP Logged  
The two button remotes you can hold down the two buttons for 3 seconds and the car starter will engage if you have all the wiring wired up properly. Button 1 lock/Unlocks, button 2 trunk release and both are remote start.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
John Doe 
Member - Posts: 11
Member spacespace
Joined: November 21, 2002
Location: United States
Posted: January 12, 2003 at 9:35 AM / IP Logged  
Ok here is the deal, I had two remote starters on my workbench and one was and older Commando EZ-2200 I ordered and it lloks just like the Impulse one I ordered.  I got them mixed up and so I switched out the brains and now here is what I get:  button 1 starts the unit, and button 2 locks and unlocks and hjolding them down pops the trunk.  this is all fine, but I like the way you said it should work ,is there away to get them to work thgat weay.  I doubt it, but it was just a thought. 
jd
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 12, 2003 at 12:03 PM / IP Logged  
Try programmin the remote so that the button 1 locks and ulocks the doors. Go through the remote programming sequence for the RES-R.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer