Command start 2400

Home / the12volt's Install Bay / Car Security and Convenience / Command start 2400 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sox and martin

Member - Posts: 2

Joined: July 01, 2006

Posted: July 01, 2006 at 4:59 PM / IP Logged

I recently lost battery power on my vehicle. The cs-555 remote no longer starts the truck. What do I need to do to get this working again? Thank you.

Search for other posts by sox and martin

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 01, 2006 at 5:30 PM / IP Logged

Find the hood pin switch in the hood.
push it down and let it return up
immediately push it down again and let it return up
the lights should stay on now and press button 1 on the remote control
the lights will flash at you once and the remote is now programmed.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

sox and martin

Member - Posts: 2

Joined: July 01, 2006

Posted: July 01, 2006 at 11:52 PM / IP Logged

Thanks Jeff, it worked great!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Command start 2400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.