the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 chevy malibu remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
blackheart131 
Member - Posts: 10
Member spacespace
Joined: November 29, 2006
Posted: December 01, 2006 at 8:51 PM / IP Logged  
im installing a crimestopper rs1304 into a 2002 chevy malibu ,  my question is on the 2nd ignition line do you need to install a relay? also when hooking up the bypass module do you program it before powering the remote starter? 
theronsmith 
Member - Posts: 36
Member spacespace
Joined: December 20, 2004
Location: Alberta, Canada
Posted: December 01, 2006 at 9:06 PM / IP Logged  
Yes, Yes
chevy II
blackheart131 
Member - Posts: 10
Member spacespace
Joined: November 29, 2006
Posted: December 01, 2006 at 9:45 PM / IP Logged  
now on the rs1304 it has a jumper for the 2nd ignition and it seems like you dont have to install the relay cause it might be int he box?  is that right or is it still needed ?
blackheart131 
Member - Posts: 10
Member spacespace
Joined: November 29, 2006
Posted: December 01, 2006 at 9:46 PM / IP Logged  

can the bypass harness be tied into the ignition t-harness?

NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: December 01, 2006 at 10:03 PM / IP Logged  
What bypass are you using anyway? You DON'T want to use a bypass that ties into the diagnostic plug data wire on an older malibu.
Mike
blackheart131 
Member - Posts: 10
Member spacespace
Joined: November 29, 2006
Posted: December 01, 2006 at 10:04 PM / IP Logged  
what is the purpose in the 2nd ignition relay on this car?
NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: December 01, 2006 at 10:28 PM / IP Logged  
In this particular vehicle, the dark green ign 2 goes from the ign switch to the fusebox, which then powers up the PCM, BCM, and instrument cluster. You MUST power this wire as an ignition wire when doing a remote start.
Mike
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: December 01, 2006 at 11:22 PM / IP Logged  
Is this Crimestopper you have a current product, or something old?
Pretty much any modern, quality remote starter will have an Ignition 2 output already built in, with no extra relay wiring required.
blackheart131 
Member - Posts: 10
Member spacespace
Joined: November 29, 2006
Posted: December 02, 2006 at 7:07 AM / IP Logged  
this is a rs1304 new system.  it is the upgraded version of the rs900.   it just came out i think this year.
Memphisman 
Copper - Posts: 161
Copper spacespace
Joined: September 29, 2002
Location: Pennsylvania, United States
Posted: December 02, 2006 at 7:30 AM / IP Logged  
The RS-1304 is last years's model. It has been replaced with the RS-1304DP II.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer