2006 hummer H3 remote start

Ela, I think we would all need a little more information about what does not work and what does.  I believe this vehicle uses GM's new start sequence where accessory voltage must be applied first, then ignition, and then the accessory voltage must turn off... this will cause the starter to engage.  You may need to check your remote starter to be sure it can duplicate this sequence.  I don't think there is an actual start wire to hook up.  Along with the passlock II bypass you will need to trigger the key sense wire durning remote start. I am not sure of the color but the last GM I did it was green.  Hope this helps.

-Tim

I have never done an H3....it says passlock 2  A good bypass would be a Passlock SL2 H3 

Someone thats done one might have a better answer though!!!!

Tim, thank you for your advise. I will send you by mail the wiring diagram that I've been used. Under the wheel I found 5 wires: white with orange, white with green, white with black, white with blue and white with red. I will send you by mail the wiring diagram for immobilizer and how I found the resistor value adn how many releys I used.

Ela

ther is a new passlock bypass made specificly for the hummer h3. here is a link.

http://www.autotoys.com/x/cust/product.php?productid=9519

john