matrix 10.5x

Home / the12volt's Install Bay / Car Security and Convenience / matrix 10.5x (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

alli j

Member - Posts: 2

Joined: June 10, 2007

Location: Iceland

Posted: August 01, 2007 at 5:51 PM / IP Logged

hi i´m puting clifford martix 10.5x in my subaru impreza´99 and i can not find how i can use the door locks system.whits wire i can use or were the wires are.can some one help me plz?? matrix 10.5x -- posted image.

and sorry if the spelling is wrong here matrix 10.5x -- posted image.

ringojam

Copper - Posts: 215

Joined: June 10, 2003

Location: Manitoba, Jamaica

Posted: August 01, 2007 at 8:48 PM / IP Logged

Subaru door locks are 2 options if this is a rhd car.Put an acuator in the door an fire it with relays but the space is very limited and the acuator has to be installed upside down .Now if you are more experienced right side under console is a large black box cant miss it next to the ignition harness,about 9in by 7in that is where te door lock system is you can use a test light and test the 2 black relays on the curcuit board and you should get a -pulse unlock and lock just solder two fine wires and bring them outside of the box. Remember this is not for the unexperienced installer, be very careful when testing.

Jamaica home of the worlds fastest man.

alli j

Member - Posts: 2

Joined: June 10, 2007

Location: Iceland

Posted: August 02, 2007 at 7:15 AM / IP Logged

yes thx i see the black box and what wire from the alarm do i use??

this is the wireing of the system

*NOTE: VIOLET and VIOLET/BLACK are common at fuse holder.

VIOLET* Unlock #87 Normally Open (Input)

BLUE/BLACK Unlock #30 Common (Output)

BROWN / BLACK Unlock #87a Normally Closed

VIOLET/BLACK* Lock #87 Normally Open (Input)

GREEN/ BLACK Lock #30 Common (Output)

WHITE/ BLACK Lock #87a Normally Closed

BLACK/ WHITE DomeLight Supervision relay Input #87

best regards

alli j

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: August 02, 2007 at 10:51 AM / IP Logged

If it is a neg pulse trigger then you use the GREEN/ black for lock and the blue/black for unlock, with the violet wires going to ground.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

matrix 10.5x

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.