the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

delay relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
redfar 
Member - Posts: 5
Member spacespace
Joined: January 12, 2005
Posted: February 01, 2012 at 1:08 PM / IP Logged  
Hello,
I am going to install front parking sensors and I going to connect them with brake lights.When I press the brake they activate.What I want is a relay that when I release the brake pedal the parking sensors stay on for approximately 30 seconds not switch off.
Can you please help me with this?I found this relay      
DEI 611T Mosfet Multi-switch, but I am not sure if this is for what I want the relay to.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 01, 2012 at 4:39 PM / IP Logged  
That's the one or a DEI 528t. But they will both activate as soon as you press the brake switch.
You're better off linking the front sensors to a speed control device, e.g. Sailes Marketing UK
redfar 
Member - Posts: 5
Member spacespace
Joined: January 12, 2005
Posted: February 02, 2012 at 2:57 PM / IP Logged  
thanks allot for your reply,I saw the manual,and I can't understand how it has to be connected.
red   +12v
green activation input, (+12v I think from the brabe switch)
black -12v
and how the yellow and brown be connected?I think they must be connected to positive and negative of the parking sensors to be switched on?
or I am wrong?
thanks in advance
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 02, 2012 at 4:12 PM / IP Logged  
You have the instructions, read carefully.
redfar 
Member - Posts: 5
Member spacespace
Joined: January 12, 2005
Posted: February 03, 2012 at 11:44 AM / IP Logged  
Today I tried to connect the DEI 611T,I can't understand what I am doing wrong.
red   +12v
green activation input, from 12v supply
black -12v
But I don't have any current at the brown and yellow.
When feed the brown wire with +12v at the yellow one I have constant +12v so the parking brakes will be always on
I put the 1 and 3 from the module on the on position
I can't understand what I'm doing wrong I think it simple as that.
I hope this is not a china rubbish and if it works only for few minutes.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 03, 2012 at 1:29 PM / IP Logged  
1 ON
2 OFF
3 ON
4 OFF
Brown 12V+ constant
Thought, try turning the timer adjustment down, then work up.
You've set it up correctly.
redfar 
Member - Posts: 5
Member spacespace
Joined: January 12, 2005
Posted: February 04, 2012 at 12:40 PM / IP Logged  
thanks I think the relay is not working properly because when I connect the brown with the +12v I always have +12v at the yellow not when I activate the module so for me is useless

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer