Isolating door trigger with relay

Home / the12volt's Install Bay / Relays / Isolating door trigger with relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kidtransam

Copper - Posts: 99

Joined: November 08, 2002

Location: United States

Posted: August 08, 2003 at 9:17 PM / IP Logged

Im installing an alarm on a 2000 Lincoln LS...I need to know how to wire the relay to `isolate` the door trigger.

Techsoft says "This wire may cause the aftermarket alarm to false when the vehicles electrical system shuts down. Use a relay to isolate it."

With a torch and a big enough hammer...it WILL friggin fit!!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 08, 2003 at 9:32 PM / IP Logged

http://www.velocitymotorsport.com/images/install_notes/149.jpg

Use diagram A for the relay isolation of the door trigger.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 08, 2003 at 9:33 PM / IP Logged

Wire the relay like this: 85 door trigger from car, 86 opposite of door trigger( sorry I don't remember polarity, think the door trigger is positive), 30 ground, 87 -trigger door trigger input from alarm.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

kidtransam

Copper - Posts: 99

Joined: November 08, 2002

Location: United States

Posted: August 08, 2003 at 9:45 PM / IP Logged

thanks guys..I appreciate it

With a torch and a big enough hammer...it WILL friggin fit!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Isolating door trigger with relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.