how many relays needed for 4 actuators?

Home / the12volt's Install Bay / Relays / how many relays needed for 4 actuators? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cambosoup99

Member - Posts: 8

Joined: October 16, 2002

Location: United States

Posted: April 17, 2004 at 10:15 PM / IP Logged

Hey guys was curious if the two relay setup for one actuator is enough to power 3 more actuators. I've done a search so far no luck. Will I need 2 relays for each actuator?? Appreciate the help in advance.

I purchased the DEI 451M, could i possibly use this to power all 4 actuators?

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: April 17, 2004 at 10:50 PM / IP Logged

2 relays, yes u can use that to operate all four doors.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: April 18, 2004 at 2:14 AM / IP Logged

Two relays wil be good enough to power all four actuators, yes. I've done it several times before. Just be sure to fuse it at 7.5 amps per actuator, which will be 30. Also, for the power and ground wiring to the relays, use no thinner than 14 guage.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how many relays needed for 4 actuators?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.