the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

relays w/diodes


Post ReplyPost New Topic
< Prev Topic Next Topic >
seeker1 
Member - Posts: 24
Member spacespace
Joined: December 02, 2007
Location: Washington, United States
Posted: December 05, 2007 at 12:26 AM / IP Logged  

I'm new to this. Tweaking a 96 mustang w/lights and remote start & control from an Audiovox aps998. In my research and installation I've ru accross relays with buit-in diodes between the 85th and 86th pin. Whats the purpose of this? If I understand right these are the coil contacts w/85 being the + contact and 86 the -. The diode setups I've seen have the cathode on 85 and the anode on 86. With 85 being the + side there wouldn't any current flow from 85 to 86 through the diode, it would go from 85 to 86 through the coil. And if there was a flow(I.E. hooked up backwards) wouldn't the current flow thru the coilanyway? Whats this diode blocking?

?????

Seeker1

Only the strong survive.
Eat the weak.
techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: December 05, 2007 at 12:54 AM / IP Logged  
They put these diodes on starter kill relays and on relays where you want the coils to slowly go out of contact such to eliminate amplifier pop when you shut system off. It depends on what your using it for.
As I posted on Nov. 4, 2007
techman93 wrote:
When energizing the coil of a relay, polarity of the coil does not matter unless there is a diode across the coil. If a diode is not present, you may attach positive voltage to either terminal of the coil and negative voltage to the other, otherwise you must connect positive to the side of the coil that the cathode side (side with stripe) of the diode is connected and negative to side of the coil that the anode side of the diode is connected.
Diodes are most often used across the coil to provide a path for current when the current path to the relay is interrupted (i.e. switched off, coil no longer energized). This allows the coil field to collapse without the voltage spike that would otherwise be generated. The diode protects switch or relay contacts and other circuits that may be sensitive to voltage spikes. (JimR, contributor, install bay member)
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
seeker1 
Member - Posts: 24
Member spacespace
Joined: December 02, 2007
Location: Washington, United States
Posted: December 07, 2007 at 12:21 AM / IP Logged  

techman93

Thanyou for the help.

Only the strong survive.
Eat the weak.
mobile1 
Silver - Posts: 479
Silver spacespace
Joined: February 23, 2004
Location: United States
Posted: December 07, 2007 at 12:25 AM / IP Logged  

a little clarification on what they are called.

Spike Supression relays or Relays with Spike Supression.

pcpackrat 
Member - Posts: 5
Member spacespace
Joined: May 07, 2006
Location: United States
Posted: December 07, 2007 at 9:54 PM / IP Logged  
When a coil is energized it creates a magnetic field. When you disconnect power from the relay the magnetic field drops across the coil creating a reverse voltage on the terminals. Auto alarm and remote start systems use transistors to control the relay and that reverse voltage will destroy the transistor. The diode is a reverse protection for the driving transistor.
-PCP

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer