Video Monitor Help

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Video Monitor Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: July 07, 2003 at 8:17 PM / IP Logged

when hooking up the power for LCD monitors, do i need to wire in a fusebox and a fuse or is this not needed?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 07, 2003 at 9:33 PM / IP Logged

It needs to be fused. As far as to the fuse box goes, you can tie into just about any source of power. I would recommend main power in the ign harness.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: July 14, 2003 at 10:59 AM / IP Logged

what size fuse should i use for the screens?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Video Monitor Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.