Resetting CVA-1000

Home / the12volt's Install Bay / General Discussion / Resetting CVA-1000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dsmith@pc-optio

Member - Posts: 2

Joined: April 19, 2003

Location: United States

Posted: April 19, 2003 at 5:18 PM / IP Logged

I was recently in an accident and while the truck was in the body shop the battery was removed. How do you reset the system. So that is operated?

David Smith

Search for other posts by dsmith@pc-optio

markwilliams

Member - Posts: 18

Joined: April 13, 2003

Location: Canada

Posted: April 21, 2003 at 7:05 AM / IP Logged

If you're talking about resetting the deck just pull the negative off the battery and it will reset when you reconnect the negative terminal.

dsmith@pc-optio

Member - Posts: 2

Joined: April 19, 2003

Location: United States

Posted: April 21, 2003 at 1:50 PM / IP Logged

I tried removing the the negative from the battery. I still don't have a green on the control switch. Are there any other suggestions? After the accident, everything still worked. It wasn't until the battery cables were disconnected at the repair shop that it stopped working.

David Smith

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Resetting CVA-1000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.