advice, mimic abs signal

Home / the12volt's Install Bay / General Discussion / advice, mimic abs signal (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

frank mc

Member - Posts: 1

Joined: April 06, 2011

Location: Ireland

Posted: April 06, 2011 at 4:09 PM / IP Logged

hi guys, i would like to know how to mimic the signal from my abs unit,

before we removed the unit we got some readings from the signal wire in question, what we got was .8 volts for 9 seconds & then switches to 12 volts, this happens every time the key is turned on.

any advice on how to do it would be really appreciated

regards frank

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 06, 2011 at 6:07 PM / IP Logged

You're asking for lots of problems. Don't go there.

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: April 06, 2011 at 8:34 PM / IP Logged

x2.

Unless you are simulating or figuring slip etc. (But thats' from the sensors.)

But to deactivate or modify - NO!

Not that I'll cro over it - I am all for deactivation, but that must be OEM etc. (In fact I will not but a vehicle whose ABS and Stability Controls (etc) can not be disabled as required...)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

advice, mimic abs signal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.